Prime San Solone PV SPP

The land-based photovoltaic solar power plant Prime San Solone SPP is located on the territory of the Solone Village Council (outside the settlement), Vilniansk district, Zaporizhzhia region. The power plant was put into operation with an installed capacity of 13.07 MW.
The design envisages the use of metal structures of a typical section for 12 desks of 8 JINERGY JNMP72-330 photovoltaic modules with an inclination angle of 23 degrees. The term of operation of the object is 10 years.

The frame of a typical section consists of a single-column frame, a distribution beam with braces and four spans (two for each row of FVMs). The stands are arranged at a distance of 4.100 m. The dimensions of one section is 3.11 m x 49.2 m. Rigidity of the frame is ensured due to the rigid clamping of the frame stands and cross space connections on the frame stands and beams in the 1st and 12th span in the ground. The angle of inclination of the upper plane of the desk is 23°.

Sheet material - S350GD and S450GD steel (Ry - 350 MPa, 450 MPa  galvanized steel with yield modulus Ry at least 350 mPa, 450 mPa) according to EN 10025-2 and EN 10346.
Anti-corrosion protection of the frame elements is provided by the factory-applied galvanic coating of the structural material with a layer of zinc of at least 275 g/m², and at least 430 g/m² for columns.