Kamianka-Solar PV SPP

/ Our projects

Kamianka-Solar 3.22 MW PV solar power plant

General Information
Kamianka-Solar 3.22 MW ground photovoltaic solar power plant is located on the territory of Izmail district of Odesa region. The power plant was put into operation with an installed capacity of 3.22 MW.
The design envisages the use of metal structures for the installation of Recom Amur Leopard photovoltaic modules with an angle of inclination of 25 degrees. The term of operation of the object is 15 years.
Constructive solutions
The frame of a typical section consists of a single-column frame, a distribution beam with braces and five spans (two for each row of FVMs). The racks are arranged in increments of 1.666...3.326 m. The dinmensions of one typical section are 4.2 m x 15.0 m. Rigidity of the frame is ensured due to the rigid clamping of the frame stands and cross space connections on the frame stands and beams in the 3rd span in the ground. The angle of inclination of the upper plane of the desk is 25°.
Structure material and anti-corrosion protection
Sheet material - S350GD and S450GD steel (Ry - 350 MPa, 450 MPa  galvanized steel with yield modulus Ry at least 350 mPa, 450 mPa) according to EN 10025-2 and EN 10346.
Anti-corrosion protection of the frame elements is provided by the factory-applied galvanic coating of the structural material with a layer of zinc of at least 275 g/m2, and at least 430 g/m2 for columns.
Isometry of the mounting system for FVM (typical section for 4,5 modules)
General appearance of the structure

Mounting systems for PV solar 
power plants manufacturer



Kraft Solergy Company

Address: Bulgaria, Burgas, 
PO box 8000, 10 Apostol Karamitev str., 5th floor, office 13
Kraft Solergy Yapi Malzemeleri Limited  Sirketi, Mersis Numarasi: 0589104109700001
Address: Ata Sb Mah. Gelincik Cad, AKBAŞLAR Holding Ges Depo No: 3, Gemlik / Bursa.